Working through RTSP

Pelco cameras have two streams rtsp//camera-ip/stream1 and rtsp//camera-ip/stream2 In my example below I use a Sarix Pro IBP519 and use the second stream from the camera. I have configured the stream to be 640x480 and 12ips but in the config.json you see that I use 30ips and this is that HomeBridge working this way. I took my second camera IME219 and to get the jpeg to work in this I needed to change the stillImageSource to be -f mjpeg -i


	"platform": "Camera-ffmpeg",
	"cameras": [{
		"name": "Baksidan",
		"videoConfig": {
			"source": "-re -i rtsp://",
			"stillImageSource": "-i",
			"maxStreams": 2,
			"maxWidth": 640,
			"maxHeight": 480,
			"maxFPS": 30